UN41 0624MN
BU RIO BO)
BUDR O ( O)
FOX DRIVE PLUS DT
FOX DRIVE PLUS
B
A
D
C
D
C
H
L
M
E
F
G
English language
Use and maintenance
9
TECHNICAL INFORMATION
2
A) Hazard plate:
read the use and maintenance manual
before using the work vehicle.
B) Hazard plate:
do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate:
switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
D) Information plate:
strap up at the anchor points
shown to lift the work vehicle.
E) Information plate:
lubricate the chain inside the
casing to which the plate is affixed.
F) Information plate:
hook up the work vehicle at the
points shown to lift it.
G) Information plate:
this indicates rotation of the part
to which the plate is applied, showing the direction
required to achieve the desired effect.
H) Plant spacing plate:
this shows the type of pinion to
fit according to the plant spacing required.
L) Plant spacing plate:
applied on the “right Rapid
Shift” wheel, it indicates the pinions to be selected,
according to the plant spacing.
M) Plant spacing plate:
applied on the “left Rapid Shift”
wheel, it indicates the pinions to be selected, accord-
ing to the plant spacing.
The plant spacing plates applied are in relation to the
number of grippers.
The plates (
E
-
G
-
H
-
L
-
M
) are fitted on every planting
unit.
Information and safety signs
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
The illustration shows the locations and meanings of the
signs affixed.
