WELL™ 2.0 User Manual Rev. 01
Page 13 of 28
Continued from previous page
Static Color
The Static Color mode allows for permanent RGB color mixing without a DMX controller.
1) Go to
STAT
.
2) Select the desired color (
RED
,
GREN
, or
BLUE
).
3) Select the desired color value (
0
~
255
).
4) Repeat for the other colors.
5) Select
STRB
.
6) Select the desired frequency (
0
~
20
).
Auto Programs
Auto programs allow for dynamic RGB color mixing without a DMX controller.
1) Go to
AUTO
.
2) Select the desired auto (
AT.01
~
10
) or custom program (
PR.01
~
10
).
You cannot edit any of the auto programs (AT.01~10). However, you can edit the
custom programs (PR.01~10). See Edit Customs for details.
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1) Go to
EDIT
.
2) Select the desired auto program (
PR.01~10
).
3) Select the desired scene (
SC.01~30
).
4) Select the desired color or effect (
RED
,
GREN
,
BLUE
,
STRB
,
TIME,
or
FADE
).
5) Select the color or effect value (
000~255
for colors and timers, or
00~20
for strobe).
6) Repeat for the other colors or effects.
7) Return to the
SCENE
level (step “3”).
8) Repeat the settings of colors and effects for the other scenes.
Master/Slave
The Master/Slave mode allows a group of WELL fixtures (the slaves) to simultaneously
duplicate the output of another WELL (the master), whether static mode settings or
auto/custom programs, without a DMX controller.
1) Set the master unit:
a) Set the running mode to
DMX
as explained in “
DMX Control.”
b) Select an auto or custom program, as explained in “
Auto Programs
”, or a static mix
of colors.
2) Set each of the slave units:
a) Go to
RUN
.
b) Select
SLAV
.
•
The fixture that is set to run a program, whether Auto or Custom, or to operate in
Static mode automatically becomes the master.
•
Do not connect a DMX controller to the master or slave fixtures.
•
The master unit should be the first in the DMX string.
Continues on the next page
