Chassis Plans
CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller
Page 9
‘A’ and ‘D’ OSD
The CPPM-8U201 provides for On Screen Display (OSD) of the controls to adjust the display parameters such as
brightness, contrast, etc. The display controller stores the settings in non-volatile memory so they are saved even
when power is turned off or removed.
To enter the OSD, press the front panel
Menu/Select
button. Then use the
Left/Decrease
and
Right/Increase
buttons to scan between each of the menu choices. When the desired menu item is selected, again press
Menu/Select
to either bring up the control bar or the underlying sub menu.
If a control bar is brought up, use the
Right/Increase
or
Left/Decrease
buttons to change the level. Press
Menu/Select
to accept the change or simply press
Auto/Exit
to accept the change and exit that menu.
If a sub menu is brought up, use the
Left/Decrease
and
Right/Increase
buttons to navigate the sub menu and
again use
Menu/Select
to change to the next menu or control.
Repeatedly pressing
Auto/Exit
will eventually exit the OSD or you can wait the number of seconds the OSD Timer
is set for to automatically exit the OSD.
Note in the Main Menu, the current resolution, horizontal and vertical frequencies are displayed. The bottom of the
Main Menu shows the controller firm ware revision.
OSD Main Menu
The main OSD menu is shown below.
Brightness
Underlying bar control to adjust the display brightness
Contrast
Underlying bar control to adjust the contrast or distinction of the display.
