Chassis Plans
CPPM-8U201 Technical Reference
Page 4
Installation
To mount the CPPM-8U201 in a rack, it is first important you identify the correct holes to mount to. Please see the
following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is
trying to install into the wrong holes. Thus the bottom edge of the display would be placed between the holes ½”
apart.
Because there are multiple styles of racks, we can’t provide detailed instructions on mounting the equipment.
However, there are general instructions at
http://www.chassis-plans.com/PDF/Rack_Slide_Use.pdf
for rack
installation which should help.
Rack Mounting Hole Spacing
See the drawing above (page 2) for the distance between the rack mounting holes on the display.
