Chassis Plans
CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller
Page 10
Color Control
Underlying menu to control the color balance of the display (aRGB only)
User
Underlying sub menu to control Red, Green and Blue
Bluish
Select to make the display ‘colder’
Reddish
Select to make the display ‘warmer’
Position
Underlying menus to control horizontal and vertical position of the display (aRGB only)
H Position
Underlying bar control to change the overall horizontal position of the image.
V Position
Underlying bar control to change the overall vertical position of the image.
Clock Phase
Underlying menu to control the clock rate and phase of the dot clock
Phase
Underlying bar control to change the overall horizontal position of the image.
Clock
Underlying bar control to change the overall vertical position of the image.
Miscellaneous
Underlying menus to control the display parameters versus image parameters
Recall
Select to Recall the factory Default Settings
OSD Time
Underlying menu to select the OSD timeout setting
OSD Position
Underlying menus to move the OSD display horizontally and vertically
Auto Color
Select to automatically adjust the display color (aRGB only)
Auto Adjust
Select to automatically adjust display timing parameters for best fit to frequency,
resolution, etc. Same effect as pressing front panel Auto/Exit button. (aRGB only)
Language
Underlying menu to control select the OSD language
Input Select
Underlying menu selects aRGB versus Digital input source. Same as Source button on front panel.
Note
Two menus are grayed out between Language and Input Select as those features are not enabled on this
display.
