Chassis Plans
CPPM-8U201 Technical Reference – ‘A’ & ‘D’ Controller
Page 8
To save your changes, press the front panel Menu/Select button or Auto/Exit. Alternatively, changes are saved if
no buttons are pressed and the OSD times out returning back to the display.
There is a Factory Reset function under the Misc Adjustments Menu (bottom left ETC symbol) should you
completely screw things up and want to start over. Select the
RECALL
function in the Miscellaneous menu.
Note
– Pressing
Source
with the OSD displayed will over-ride the OSD and change the input source. When a
valid signal is detected, the front panel LED will turn green.
Note
– Pressing
Source
with the ‘A’ input (aRGB only) will change the internal source to Digital. However, a
digital input is not available and nothing will be displayed.
