. Installing the handlebar
Cougar and Cheetah
Push the handlebar into the upper frame open tube ends.
Depress both spring buttons simultaneously and push both
ends of the handlebar at the same time into the tube ends until
the spring buttons engage.
the handlebar‘s height can be adjusted for two different
positions: remove by depressing the spring buttons together,
pull out the handlebar, rotate it 180° and re-insert the handlebar
into the tube ends.
warning
Before each journey make sure that the spring buttons of
the handlebar are fully engaged. Failure to properly install
the handlebars could cause the carrier to become separated
from you resulting in an accident in which your passenger(s)
could suffer serious injury or death.
CX
the handlebar of the cx is installed in the same manner as
described in the section above. only one position is possible
however, as the ergonomic five-position CX handlebar allows it to
be gripped in various height positions, depending on use.
warning
Before each journey make sure that the spring buttons of
the handlebar are fully engaged. Failure to properly install
the handlebars could cause the carrier to become separated
from you resulting in an accident in which your passenger(s)
could suffer serious injury or death.
nOTE
always make sure that you do not bend the brake cable of
the cx. this might reduce the braking effect, or the brake
may not continue to function.
!
!
Summary of Contents for CHEETAH 1
Page 54: ......
