. The Strolling Kit
the assembled stroller (cts ready c strolling Kit)
Supplied as
standard
Strolling Kit:
2 x 8” stroller wheels
Safety instructions for use as a Stroller
Please make sure you read the safety instructions in the
“safety” section at the beginning of this owner’s manual.
Before each journey check that all components are properly
fitted, particularly the stroller casters and the handlebar.
Do not park the carrier on roads or other places which are on
an incline.
if you leave the stroller stationary, always secure it with the
parking brake.
when pushing the stroller, always put the wrist safety strap
around your wrist.
inline skating with the stroller is not permitted.
the foot activated parking brake on the cheetah 1, cheetah
2, cougar 1 and cougar 2 models is not suitable for
deceleration of a moving carrier.
so as to prevent it from tipping backwards, the storage
bags at the rear of the carrier may not be loaded with
excessive weight. carry out the following check: Depress the
handlebar by about 6”/15 cm. the carrier should return to
”/15 cm. the carrier should return to
/15 cm. the carrier should return to
its original standing position and should not tip backwards.
manufacturer’s recommendation: maximum load in the
storage bags together if no handlebar bag is being used.
the maximum load of the handlebar bag is 1 kg/2.2lb. the
maximum load of the other storage bags is reduced to 2kg
/4.4lb if the handlebar bag is loaded with 1 kg/2.2lb.
•
•
•
•
•
•
•
•
Safety instructions for using the brake system
on the CX 1 and CX models:
Before using the brake system for the first time, acquaint
yourself with its braking effect.
On your first journeys always take the Owner’s Manual
with you in case adjustments need to be made to the brake
system.
check the braking effect before each journey.
Before each journey check that both brakes operate with the
same force.
Before each journey check that the lock nuts are tight on the
adjusting screws.
Before each journey check that there are no kinks in or other
damage to the brake cables.
always ensure that when the parking brake is applied the
spring button is fully pressed in. if this is not done, the brake
lever could be released and the parked carrier could roll
away.
Only park the carrier on flat surfaces.
check that the parking brake is working properly. always
check that the carrier cannot roll away. if the carrier is given
a push, it should immediately come to a stop once it has
been released.
if the carrier is not held securely by the parking brake, the
brake must be readjusted.
remember that the brake drums heat up when used, so
there is a risk of burning yourself if you touch them.
Before each journey make sure that the brake system
adjusting screws are secured and not unscrewed too far.
if you need to replace brake system components due to wear
or for other reasons, only have replacement carried out by a
authorized chariot retailer.
Keep the insides of the drum brake dry and free of dirt.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Summary of Contents for CHEETAH 1
Page 54: ......
