Assembly
to attach the stroller wheel, press the plastic button on the
side of the Versawing 2.0 until it can go no further. then, from
below, insert the upward pointing caster shaft of the stroller
wheel into the vertical hole of the Versawing 2.0 until it can go
no further.
release the plastic button. this now clicks back towards the
outside, resulting in locking of the attachment axle of the stroller
wheel.
warning
always make sure that the stroller wheels are properly and
fully engaged and locked. to check this pull the stroller
wheels up and down in a vertical direction. make sure that the
plastic locking button has fully clicked back. Failure to do so
could result in loosening of the wheels causing an accident
in which you and/or your passenger(s) could suffer serious
injury or death.
if you want to convert the carrier from stroller to another cts
conversion Kit, you can store the stroller wheels on the top of
the Versawing 2.0 .
to attach them proceed as described above.
the caster fork arms should point backwards.
warning
always make sure that the stroller wheels are fully engaged
and locked. Failure to do so could result in loosening of the
stroller wheels causing an accident in which you and/or your
passenger(s) could suffer serious injury or death.
Travelling
Always make sure you follow the Owner’s Manual for the
brake system on the CX – please see Section .10.
correct assembly of the stroller
wheels for carrying them
out-of-use when used as a
Bicycle trailer.
Wrong!!!
warning
when used as a Bicycle trailer, the stroller wheels must
never be installed in their use position (wheels down). they
may only be carried in their out-of-use position (wheels up)
Failure to do so may lead to an otherwise avoidable accident
in which you and/or your passenger(s) could suffer serious
injury or death.
!
!
!
Summary of Contents for CHEETAH 1
Page 54: ......
