background image

.  General safety instructions

Basics

Before using the carrier, please read through the owner’s 
manual carefully. Failure to comply with the safety 
instructions may result in serious personal injury or death, to 
both the user and/or the occupants of the carrier.
when using the carrier, always comply with local safety and 
accident prevention regulations, as well as the local road 

Traffic Act, all of which may restrict use in some way.

safe and appropriate use of the carrier is your responsibility. 

Before using the carrier for the first time, acquaint yourself 

with its handling characteristics away from public roads and 
without carrying children. an empty carrier will tip over more 
easily when going over obstacles with one wheel only than 
one carrying a load. a fully loaded carrier makes greater 
demands on the deceleration devices.
negotiate inclines and corners with the utmost caution and 
reduce speed when doing so.

Do not use the carrier around or near an open fire or 

exposed flame.

With regards to transporting children 

when the carrier is used in trailer mode, the rider and the 
children being carried must wear suitable cPsc or ce 
approved helmets.

never leave your child unsupervized in the carrier.
regularly check that your children are appropriately clothed 
and that they feel comfortable especially in hot and cold 
temperatures.
only children who are over 1 year old and who can sit up 
without support may be carried.
the maximum height of children who may be carried            
is 111 cm (43.7“).
in carriers designated as single-seaters only one child 
may be carried; in two-seater carriers the maximum is two 
children.
make sure that the limbs, clothing or toys of the child do not 
come into contact with the carrier wheels or the rear wheel of 
the towing bicycle.

warning

in extreme temperatures, make sure that the child has proper 
ventilation in the case of extreme hot, or protection in the 
case of extreme cold.  a child left in the trailer during extreme 
temperatures and without adequate venting or protection 
could suffer serious injury or death.

With regards to the carrier

never carry any heavy or sharp protruding items in the 
storage space of the carrier if you are also carrying children 
at the same time (risk of injury on braking).
items of luggage should be well secured so that they cannot 
move around during the journey. unsecured items of luggage 
and overloading reduce riding stability and make the carrier 

more difficult to handle.

the carriers are bicycle carriers and must never be towed 
behind motorised vehicles.
the carriers must not be carried on the roof of a vehicle, 


even when folded, as they will get damaged.
at various points on the carrier, self-locking nuts are used. if 
these have been loosened they must not be reused. once 
they have been loosened they lose their original function, 
and this can lead to unexpected loosening of the screw 
connection with potentially serious consequences.
Do not use the carrier at temperatures below -20°c /-4°F 
and do not store it at these temperatures. the windows may 
break.
when folding up or opening the carrier, there is a risk of 

pinching your hand or fingers. Ensure children are clear of 

any moving parts, otherwise they may be injured.

With regards to the children in the carrier

when converting with other cts conversion Kits, no 
child should be sitting in the carrier, nor when carrying out 
maintenance or repair work.
the permitted total cargo load of the carrier is limited to      
34 kg / 75 lb on the single-seater and 45 kg / 100 lb on the 
two-seater. this must never be exceeded. the cargo load 
is the weight of the children together with any luggage there 
might be.
Please explain to your child that he/she must not bounce, 

fidget or lean out of the carrier.

. Safety information for all travelling situations

With regards to the children in the carrier

never carry items of luggage on the seat next to your child.
never carry animals together with your children. 
always make sure the seatbelts are correctly fastened 
around your child and are correctly adjusted to the height 
of your child. if this is not the case, your passenger(s) could 
suffer serious injury or death in the event of an accident. 
when travelling faster than walking pace, always use at the 
very least the mesh component of the two-in-one weather 
cover.
as the children get in and out, and whenever you park the 
carrier, the parking brake must be on to prevent the carrier 
from accidentally rolling away.

With regards to the carrier

take care when travelling over uneven surfaces. the carrier 
can overturn if driven with one wheel only across uneven 
ground, even at very low speed.
Before each journey check the tire pressure. the minimum 
recommended pressure is 30 psi (2.1 bar) and the maximum 
is 35 psi (2.5 bar). even if a higher pressure is permitted 

for the tires fitted, the Manufacturer recommends that                

35 psi (2.5 bar) not be exceeded. air pressure that is too high 
considerably reduces the comfort of the children, especially 
on carriers without suspension. 
Do not use compressed air lines (e.g. at service stations). 
the tyres may burst due to the small volume of the tubes.
never go up or down steps with the carrier.
never use the carrier on escalators.
Before each journey check that the wheels are fully engaged.
Before each journey check that the folding auto-lock disk is 
fully engaged.
Before each journey check that the spring buttons of the 
handlebar are fully engaged.






!

Summary of Contents for CHEETAH 1
























































Reviews: