![background image](http://html1.mh-extra.com/html/champion/76526/76526_owners-manual-and-operating-instructions_2588934012.webp)
9
REV 76526-20140807
ENGLISH
76526
ASSEMBly
Your pressure washer requires some assembly. If you have
any questions regarding the assembly of your pressure
washer, call our help line at 1-877-338-0999. Please have
your serial number and model number available.
Install the Wheel Kit
You will need the following tools to install the wheels:
• 17 mm wrench OR adjustable wrench (not included)
• Socket wrench with a 16 mm socket (not included)
• Pliers (not included)
1. Before adding fuel and oil, tip the pressure washer on
it’s side.
2. Slide the M10x135 wheel bolt through the washer,
sleeve and wheel.
3. Slide the bolt through the mount point on the frame.
4. Fasten securely with the M10 nut.
5. Repeat steps 2-4 to attach the second wheel.
Install the Support leg
1. Attach the support leg to the pressure washer frame
with cap screws (M8x16) and nuts (M8).
2. Tip the pressure washer slowly so that it rests on the
wheels and support leg.
The wheel kit is not intended for over-the-road use.
CAUTION
This unit ships from our factory without oil. It must be
properly serviced with fuel and oil before operation.
CAUTION
Connect the Battery
1. Remove the protective cover from the red (+) lead on
the battery.
2. Attach the red (+) lead to the red (+) terminal on the
battery with the cap screw and secure with the nut.
3. Repeat steps 1-2 for the black (–) battery lead.
Install the Handle
1. Place the handle over the mounting channel on the
frame.
2. Secure the handle to the frame using the two handle
bolts (M8x45).
3. Place a lock nut (M8) on the end of each bolt and
fasten securely. DO NOT over tighten the lock nuts.
Remove the Pressure Washer from the
Shipping Carton
1. Set the shipping carton on a solid, flat surface.
2. Remove everything from the carton except the
pressure washer.
3. Carefully cut each corner of the box from top to bottom.
Fold each side flat on the ground to provide a surface
area to install the wheel kit and support leg.