![background image](http://html1.mh-extra.com/html/champion/76526/76526_owners-manual-and-operating-instructions_2588934010.webp)
7
REV 76526-20140807
ENGLISH
76526
CONTROlS AND fEATURES
Trigger Start
™
Operation
This pressure washer is equipped with a patent pending
system that allows the operator to start and stop the
engine using the pressure washer gun. When working
at any distance from the machine, just pull the trigger
to start the engine and release the trigger to stop the
engine. There is no need to return to the machine to start
and stop the engine.
To activate the Trigger Start feature:
1. Connect and turn “ON” the water supply.
2. Make sure the fuel valve is in the “ON” position.
3. Move the Ignition Switch to the “ON” position.
4. Move the Trigger Start Switch to the “Enable”
position.
Only when the Trigger Start feature is active can the
engine be started or stopped using the trigger of the gun.
To start the engine using the Trigger Start feature:
1. Pull and hold the trigger of the gun.
2. The engine will attempt to start approximately 3
seconds after water begins to flow out of the gun.
There is no need to manually choke the engine. The
Engine Control Module automatically chokes the
engine during startup. If the engine fails to start on
the first attempt, it will automatically try again up
to six (6) times, without need of extra pulling of the
trigger.
NOTE
If the trigger is released and then pulled before 15
seconds has elapsed, the engine will continue to run.
This allows the unit to continue running while the
operator stops washing momentarily to move the unit
or the object being washed.
NOTE
To stop the engine using the Trigger Start feature:
1. Release the trigger of the gun
2. The engine will turn “OFF” approximately 15 seconds
after the trigger is released.
Note: When the Trigger Start switch is in the “disabled”
position, the gun trigger will not start or stop the engine.
The water supply must be connected and turned “ON” for
the Trigger Start feature to function.
Note: Extension hoses may be added without affecting
this feature.