![background image](http://html1.mh-extra.com/html/champion/76526/76526_owners-manual-and-operating-instructions_2588934013.webp)
REV 76526-20140807
10
76526
ENGLISH
ASSEMBly
Install the Hoses
Attach the Pressure Gun
1. Attach the wand with nozzle to the gun.
2. Connect the high pressure hose to the outlet
connection on the utility panel.
3. Connect the other end of the high pressure hose to
the gun.
Connect to Garden Hose
Secure a garden hose (not included) to the inlet
connection on the utility panel.
Attach the Detergent Hose
Connect the clear detergent hose to the brass barb on
the pumps outlet connector.
Place the filter end of the detergent hose into pressure
washer detergent (not included).
Attach the Hose Hanger
1. Slide hose hanger over the top of frame (recoil side).
2. Align hose hanger with mounting points on frame.
3. Slide the bolt (M8x40) through the mount point on
the frame.
4. Fasten securely with the M8 nut.
Attach the Wand Holder (Clamps)
1. Align clamp with mounting points on frame (power
panel side).
2. Slide the bolt (M5x12) through the mount point on
the frame.
3. Fasten securely.
4. Repeat steps 1-3 for second clamp.
Attach the Gun Holder
1. Align gun holders with mounting points on frame
(Back side).
2. Slide the bolts (M6x14) through the mount points on
the frame.
3. Fasten securely.
Detergents can only be applied at low pressure setting,
when using the black detergent nozzle.
NOTE
Bleach is a highly corrosive chemical. If bleach is run
through the unit, thoroughly flush clean water through
the detergent siphon hose and unit before storing.
Failure to do so will void warranty and will result in
damage to your pressure washer
NOTE