![background image](http://html1.mh-extra.com/html/champion/40903/40903_owners-operators-manual_2588961009.webp)
8
STEP 3.
THROWING ARM ASSEMBLY (FIG-7).
Line-up three holes in Throwing Arm (A) with
three holes in Arm Support. Insert three 10MM
X 20MM Hex Head Bolts (N-5) from bottom
through Throwing Arm Support and Throwing
Arm. Add 10MM Flange Nut (N-10) and tighten
securely using wrenches.
STEP 4.
FLIGHT CONTROL RAIL ASSEMBLY (FIG-7).
Line-up threaded holes in Flight Control Rail
(G) with top holes in edge of Throwing Arm
(A). Attach Flight Control Rail with three Round
Head Screws (N-7). Do not fully tighten screws
until the Target Clip is installed (Step 5)
NOTE: It is normal for these screws to be
somewhat difficult to turn.
STEP 5.
TARGET CLIP ASSEMBLY (FIG-8).
After attaching the Flight Control Rail in the
previous step, slide the Target Clip (I) between
the Flight Control Rail (G) and the Throwing
Arm (A) and tighten the three screws (N-7).
STEP 6.
MAINSPRING ASSEMBLY (FIG-9)
Drop Hex Bolt (N-8), threaded end first, into Mainspring (H) through largest
opening so that threaded end comes out of opposite tapered end. Make
sure Throwing Arm (A) is pointing forward (12 o’clock position). Connect
hook end of Mainspring (H) through hole in Swivel Yoke. Put threaded end
of Hex Bolt (N-8) through hole in Rear Bracket. Add the Nylon Shoulder
Washer (N-14), 10MM Flat Washer (N-9), and 10MM Hex Nut (N-11) and
finger tighten. Adjustment of Mainspring tension for throwing targets will
be done later.
TRAP ASSEMBLY INSTRUCTIONS (continued)
Throwing Arm (A)
Flight Control
Rail (G)
Sheet Metal Screws (N-‐7)
3/8-‐16 Flange Nuts (N-‐10)
Arm Support
3/8-‐16 x 7/8” Hex Bolts (N-‐
5)
FIGURE 7
FIGURE 8
Target Clip (I)
Throwing Arm (A)
3/8-‐16 x 4” lg.
Hex Bolt (N-‐8)
Nylon
Shoulder
Washer
(N-‐14)
3/8” Flat
Washer (N-‐
9)
3/8-‐16
Hex Nut
(N-‐11)
Swivel Yoke
Mainspring
Assembly (H)
Cotter Pin
Washer
Rear Bracket
Trap Arm Faces Forward
FIGURE 9
FIGURE 7
FIGURE 8
FIGURE 9
Round Head Machine Screws (N-7)
10MM Flange Nuts (N-10)
3/8” Flat Washer
(N-9)
10MM X 20MM Hex Bolts (N-5)
10MM X 125MM
Lg, Hex Bolt (N-8)
10MM Flat
Washer (N-9)
10MM
Hex Nut
(N-11)
Summary of Contents for 40903
Page 2: ...ENGLISH FRAN AIS 2 13 14 25...
Page 27: ......