1
BEFORE STARTING
Read and follow all instructions. Disconnect ALL power and
batteries to the operator. Do not connect batteries until
instructed.
NOTE:
These instructions and illustrations may vary slightly from
the solar panel you purchased.
SOLAR PANEL INSTALLATION GUIDE
MODELS SP10W12V AND SP20W12V
Solar Panel
Solar Panel Mounting Bracket
Model SP10W12V (1)
Model SP20W12V (2)
Hex Bolt
Model SP10W12V (2)
Model SP20W12V (4)
Hex Nut
Model SP10W12V (2)
Model SP20W12V (4)
Washer
Model SP10W12V (2)
Model SP20W12V (4)
Lag Screw
Model SP10W12V (2)
Model SP20W12V (4)
To avoid SERIOUS PERSONAL INJURY or DEATH from a
moving gate, disconnect ALL electric and battery power
BEFORE performing ANY service or maintenance.
CARTON INVENTORY
HARDWARE
REQUIREMENTS
OPERATOR MODEL
NUMBER
BATTERY
APPLICATION
BATTERY TRAY
SOLAR HARNESS KIT
CONTROL BOX
WIRING PAGE
REFERENCE
CSL24VDC, CSL24U,
CSW24VDC, CSW24U
7AH
not required
Model K94-37236
Not required
4, 6
33AH
REQUIRED
(Model K10-36183)
Model K94-37236
Not required
4, 6
RSL12VDC, RSL12U,
RSW12VDC, RSW12U
7AH
Not required
Model K94-37236
Not required
5, 6
33AH
Not required
Model K94-37236
Not required
5, 6
LA400CONTU,
LA400VDC,
LA500CONTU,
LA500VDC
7AH
Not required
Model K94-37236
Not required
4, 6
33AH
REQUIRED
(Model K10-36183)
Provided with
XLSOLARCONTU
Model
XLSOLARCONTU
4, 6
LA412CONTU,
LA412VDC
7AH
Not required
Not required
Not required
5, 6
33AH
Not required
Not required
Model
XLSOLARCONTU
5, 6
LA500
7AH
n/a
n/a
n/a
n/a
33AH
REQUIRED
(Model K10-36183)
Provided with
XLSOLARCONTU
Model
XLSOLARCONTU
4, 6
CSL24V, CSW24V
7AH
n/a
n/a
n/a
n/a
33AH
REQUIRED
(Model K75-34986-2)
Model K94-36596
Not required
4, 6
RSW12, RSL12,
LA400, LA412
n/a
Not required
Not required
Not required
7
WARNING:
This product can expose you to chemicals
including lead, which are known to the State of California to
cause cancer or birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
NOTE:
Battery quantity and wiring configuration vary depending on the operator. For example, 24vdc operators require 2 batteries in
series, and 12vdc operators require 1 battery or 2 batteries in parallel. Consult the operator installation manual for detailed battery
information.
