1. Instruction manual (this document)
2. Stop collar
3. Clamp bracket, plates, washers (2) and nuts (2)
4. E940C car visor transmitter (1)
5. E950C transmitter (2)
6. Opener
7. Self tapping screws (2)
8. Weight bar screws (2), washers (2) and nuts (2)
9. Warning label and risk of entrapment label
10. Warranty registration card
11. Quick start guide
12. Weight bar
13.
MyQ Gateway (includes power pack)
14.
Safety Beams (inlcudes 15 cable tie mounts)
CARTON INVENTORY
1
Quick Start Guide
13 mm, 10 mm, 8 mm
5.5 mm
Marke
r Pen
8
TOOLS REQUIRED
2
1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8 mm socket, 10 mm socket and 13 mm extended
socket and socket wrench
4. 300 mm socket extension (for minimum side-room
installations)
5. Drill and 5.5 mm drill bit
6. Philips-head screwdriver
7. Marker pen
8. Rope
DOOR REQUIREMENTS
3
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door
drum wheel is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
Assemble the opener to the door axle and the exisitng door bracket using the U clamp assembly provided.
Tighten to 25-28 Nm. Full installation process is in section 12.
95 mm
Minimum distance from
edge of curtain to edge of
door bracket 45 mm
The HandyLift MyQ (CR700MYQ) is suitable for spring balanced
Residential Rolling garage doors with:
• Maximum door height of 4.5 m
• Maximum curtain area of 16 m
2
• Maximum door mass of 100 kg
*
The obstruction detection beams must be installed for all myQ
installations and all other installations where the force at the edge
of the closing door exceeds 400 N (40 kgf).
Door axle diameter must not exceed 35 mm.
2
