19
BEEP
AUDIBLE BEEP (OPTIONAL)
AUDIBLE
BEEP
DN
UP
P
S
1
2
3
Flash
x 2
BEEP
The HandyLift MyQ (CR700MYQ) has been
factory set for an audible “BEEP”.
The Audible beep can be turned OFF by using the
following method.
• Start with the door fully CLOSED.
• Press and Hold both “S” and “DN” buttons
for 3 seconds
• The Courtesy light will flash “TWICE”.
Release the buttons.
To turn the audible beep back ON, simply repeat the
above process.
20
Door Fully Closed
fig.1
fig.2
fig.3
Flash
x 1
Flash
x 2
DN
UP
P
S
1
2
3
BEEP
DN
UP
P
S
1
2
3
BEEP
This is an adjustable, second stop position, that can be pre-
set, partially open for ventilation, pedestrian or pet access,
programmed to the Remote Control.
MyQ Activation:
It is not a normal feature of the MyQ phone
App, however, from the pre-set position, an open door can be
fully “CLOSED”ʻ but a closed door cannot be “OPENED” to
the pre-set position.
To activate the ventilation mode:
1.Start with the door fully
CLOSED
(figure 1). Drive the
opener UP and stop at the position required for you wish to
set the door at.
2.Enter ventilation activation mode by pressing the
P
and
UP
buttons together for 3 seconds (figure 2). Release when the
courtesy light flashes once.
3.Press the remote control button that you have allocated for
this feature (figure 3). Do not use the button already
allocated for normal operation. The courtesy light will flash
when the code is accepted.
The remote will now operate to and from the “programmed” and
the “fully closed position”. Outside this range the remote will
operate as normal.
To deactivate the partial opening feature:
1.Start with the door fully
CLOSED.
2.Enter ventilation mode by pressing the
P
and
UP
buttons
together for 3 seconds (figure 2). The courtesy light will
flash twice, indicating that deactivation has occurred.
VENTILATION MODE - PARTIAL OPENING FEATURE
21
