3
6
Operation
Using your Door Control
MOTION DETECTING CONTROL PANEL
Command
LED
Push Bar
Motion Sensor
Switch
LIGHT Button
Motion Sensor
LEARN Button
LOCK Button
SYNCHRONIZE THE DOOR CONTROL:
To synchronize the door control to the garage door opener, press the
push bar until the garage door opener activates (it may take up to 3 presses). Test the door control by
pressing the push bar; each press of the push bar will activate the garage door opener.
PUSH BAR:
Press the push bar to open or close the door.
LEARN BUTTON:
Use to program compatible remote controls, wireless keyless entries and myQ
®
devices to
the garage door opener.
MOTION SENSOR:
Turns the garage door opener lights on when motion is detected. Lights stay on for 4-1/2
minutes (factory setting), then turn off. Set the motion sensor switch ON or OFF to control this feature.
LOCK:
Prevents
remote
controls
from
working,
while
still
allowing
activation
from
the
door
control
and
keyless
entry.
(Factory
setting
is
OFF.)
Turn
ON:
Press
and
hold
the
LOCK
button
for
2
seconds.
The
command
LED
will
flash
as
long
as
the
lock
feature
is
on.
Turn
OFF:
Press
and
hold
the
LOCK
button
for
2
seconds.
The
command
LED
will
stop
flashing
and
normal
operation
will
resume.
