27
Fig. 5-12 Battery test
If a battery status fault of “bad battery detected” or “battery disconnected”
is found, the battery failure symbol will be shown and the UPS will alarm.
5.3 Turning the UPS on and off
Attention: The UPS can only be turned on when connecting to the mains
input for the first time.
Attention: Please switch off all connected loads first before turning on the
UPS. Once operational, switch on the loads one by one. Switch off all of the
connected loads before turning off the UPS.
Fig. 5-13 Battery Fails
Summary of Contents for C400R-010-B
Page 7: ...3 ...
