8
Note: Three or more EBMs can be connected to the UPS in the same way as shown
above.
Note: After connecting the EBMs please do not forget to set the number of EBMs on
LCD (see section 12).
1.2 Operation
Do not disconnect the mains cable on the UPS or the building wiring socket
(grounded shockproof socket) during operation as this would remove the ground to
the UPS and of all connected loads.
The UPS features its own internal current source (batteries). There is risk of
electrical shock from the UPS output sockets or output terminal block even if the
UPS is not connected to mains supply.
In order to fully disconnect the UPS, first press the ON/OFF button to turn off the
UPS, then disconnect the mains lead.
Ensure that no liquid or other foreign objects can enter the UPS.
Do not remove the enclosure. This system is to be serviced by qualified service
personnel only.
Remove the protective panel only after disconnecting the terminal connections.
Summary of Contents for C400R-010-B
Page 7: ...3 ...
