Predator Gasser NX
Page 39
CNM4X5SS
M3*4
CNBB1350
M3X4SS
CNBB1350
CNBB1150
7
8
9
10
11
12
13
1
2
3
4
5
6
Slide the tail output gear
(larger 14 tooth) onto the
tail output shaft with the gear
teeth towards the set hole that
is closer to the end of the shaft
and align the hole in the gear to the
hole on the shaft that is farther from the end of the shaft. Secure with one M3x4 set screw
using Blue threadlock. Slide the tail output shaft spacer tube onto the shaft followed by the two
M5x7 washers. Finally, install the 5x13x4 ball bearing.
14 Tooth
Output Gear
Tail Output
Shaft Assembly
Tail Input Shaft
Assembly
13 Tooth
Input Gear
The tail output shaft has an M3 set hole. The tail output gear has threaded hole on the gear. Secure the gear
with one M3x4 set screw using Blue threadlock. Slide two M5x13 ball bearings and the torque tube coupler
onto the tail shaft and install temporarily into one half of the tail gearbox (positioning the bearings) and secure
the M4x5 set screw when the torque coupler and the silver gear are flush to the bearings. Remove the as-
sembly, press the bearings together and apply a small amount of Red threadlock on the shaft in the final
positions of the bearings. Slide the bearings back in place and put back into the gearbox half to allow
the threadlock to dry.
TAIL INPUT AND OUTPUT SHAFTS ASSEMBLY
编号
数量（PCS）
序号
1
2
3
4
1
1
2
1
(尾输出轴)
TAIL GEARBOX INPUT SHAFT
CNBB1350
HW6070
HW6075A
METAL HIGH SPEED TAIL GEAR SET (14 to 13)
5
6
HI6154
3
1
(无头内六角螺丝)
M3x4 SOCKET HEAD SET SCREWS
CNM3X4SS
(轴承)
5x13x4 BALL BEARING
(无头内六角螺丝)
M4x5 SOCKET HEAD SET SCREW
(苟股接头)
TORQUE TUBE DRIVE COUPLER
CNM4X5SS
名称（ENGLISH-中文）
7
8
9
10
1
1
2
1
(尾固定套)
TAIL OUTPUT SHAFT SPACER TUBE (for STANDARD SHAFT)
CNBB1350
HW6074
11
12
CNBB1150
1
1
(轴承)
5x13x4 BALL BEARING
HW6075A
(尾输出轴)
TAIL GEARBOX OUTPUT SHAFT
HW6073
(垫片)
M5X7 WASHER
METAL HIGH SPEED TAIL GEAR SET (14 to 13)
(轴承)
5x11x4 BALL BEARING
(无头内六角螺丝)
M3x4 SOCKET HEAD SET SCREWS
CNM3X4SS
13
1
CNM5X7FW
