Page 62
28. Installation handover
Once the installation has been successfully completed and tested, it is important for the
installer to explain the operation and safety requirements of the system.
NEVER ASSUME THE USER KNOWS HOW TO SAFELY OPERATE AN AUTOMATED
BARRIER!
Even if the user has used one before, it does not mean he knows how to SAFELY operate
it. Make sure that the user fully understands the following safety requirements before
finally handing over the site.
The following needs to be understood by the user:
How to operate the manual release mechanism.
(Show them how by
demonstration)
How the safety loops and all other safety features work.
(Show them how by
demonstration)
All the features and benefits of the operator, i.e. Safety loops, etc.
All the safety considerations associated with operating an automated barrier.
The user should be able to pass this knowledge on to all other users of the
automated system and must be made aware of this
responsibility.
!
!
!
!
!
Do not activate the barrier unless you can see it and can
determine that its area of travel is clear of people, pets, or
other obstructions
!
NO ONE MAY GO UNDER A MOVING BARRIER. Always keep
people and objects away from the barrier
!
NEVER LET CHILDREN OPERATE OR PLAY WITH THE BARRIER
CONTROLS, and do not allow children or pets near the barrier area
!
Be careful with moving parts and avoid close proximity to areas
where fingers or hands could be pinched
!
Secure all easily accessed barrier operator controls in order to
prevent its unauthorized use
!
Keep the automated barrier system properly maintained, and ensure
that all working areas are free of d objects that could affect the its
operation and safety
!
On a monthly basis, check the obstruction detection system and
safety devices for correct operation
!
All repair and service work to this product must be done by a
suitably qualified person
This product was designed and built strictly for the use
indicated in this documentation. Any other use, not
expressly indicated here, could compromise the good
condition/operation of the product and/or be a source of danger!
!
Centurion Systems (Pty) Ltd does not accept any liability caused by improper use, of the
product, or for use other than that for which the automated system was designed
.
Ensure that the customer is in possession of the User Guide and that you have
completed the installation details in the back of the manual.
