CLAWS
CLAWS are modular barrier spikes designed to
significantly enhance the security of an entry or
exit. The CLAWS can be interfaced with the
SECTOR
traffic barrier in a direct drive
configuration via the barrier’s external status
output, i.e. the spikes will raise when the boom
pole lowers etc. An independent drive
configuration is also available, meaning that the
CLAWS will operate independently from the co-
installed
SECTOR
barrier. Also note that flush
and surface mount variants of CLAWS are
available.
CLAWS are highly effective in cases where
optimum security and access control are
required.
FLUX 11
In addition to the onboard inductive vehicle
loop detector that is supplied with the
SECTOR
controller, a stand-alone 11 pin detector can
also be installed to add an extra level of safety
to any installation. The FLUX 11 is a single-
channel, stand-alone highly sensitive inductive
loop detector designed for vehicle access
applications. The unit can be integrated into an
existing
SECTOR
installation by plugging it
into one of the 11 pin connectors, and used in
conjunction with either a closing (safety) loop
or a free-exit loop.
For more information on the
SECTOR
breakaway coupler, TRAPEX, CLAWS,
FLUX 11 or any other CENTURION-supported products, please refer to the
documentation included with the respective products or contact Centurion
Systems directly.
Page 61
FIGURE 44. SURFACE AND
FLUSH 3MOUNT CLAWS
FIGURE 45. FLUX 11
Midi Traffic Light
The CENTURION Midi Traffic Light enables you
to visually indicate when it is safe for a vehicle
to proceed into or out of an access controlled
area, allowing for an added element of safety
and control
FIGURE 46. Midi Traffic Light
