Page 40
!
When not in
Setup Mode
, ie
Normal Mode
, the round ( ) button is used as a
test
button for operating the system. The up/down buttons are not used unless the
diagnostic screens have been selected to appear in normal mode, in which case these
buttons allow switching from one screen to the next
!
For each feature a
Factory Default
setting has been programmed into the
controller. Referred to as an
Operating Standard or Profile
, these defaults have
been determined to suit the requirements of the specific region where the
installation is being carried out. It is only necessary to change a feature where the
default does not suit the installation. When selecting any feature in the menu, details
of the current setting stored in the controller are displayed
!
When selecting any of the features on a new or defaulted controller, the LCD will
display the default value
