background image

- 5 -

SDOPD

IMPORTANT SAFETY RECOMMENDATIONS

15. Never use the AGDO unless the garage door is in full view and free from any object which may impede the

movement of the garage door such as cars, children and / or adults.

16. Never allow children to operate the AGDO.

17. Never operate the AGDO when any persons are under or near the path of the garage door. Children

must

be

supervised at all times when near the garage door and when the AGDO is in use.

18. Never attempt to disengage the AGDO to manual operation when there are children / persons and / or solid

objects including motor vehicles under or near the path of the garage door as the garage door may fall sharply

upon manual release from the AGDO.

19. Never attempt to open or close the garage door by pulling on the Engage / Disengage Cord.

20. Never attempt to make any repairs or remove covers from the AGDO without first disconnecting the power

supply cord from main power supply.

21. Removal  of  the  AGDO’s  protective  covers  must  only  be  performed  by  a  technically  qualified  person.

Attempting to remove the protective covers or repair the AGDO without suitable technical qualification may

result in severe personal injury, death and / or property damage.

22. For  additional  safety  we  strongly  recommend  the  inclusion  of  Safety  Beams.  Although  the  AGDO

incorporates a pressure sensitive Safety Obstruction Force system the addition of Safety Beams will greatly

enhance  the  operating  safety of an  automatic  garage  door  and  provide  additional  peace  of  mind.  In  some

countries it is a mandate of law to fit Safety Beams. It is the sole responsibility of the owner / installer to fit

Safety Beams in those countries that so require.

23. Always ensure that the garage door is fully open and stationary before driving in or out of the garage.

24. Always ensure the garage door is fully closed and stationary before moving out of its view.

25. Adjustments  to  the  Safety  Obstruction  Force  settings  must  only  be  carried  out  by  a  technically  qualified

person. Attempting to adjust the settings without suitable technical qualification may result in severe personal

injury, death and / or property and / or AGDO damage.

26. Keep hands and loose clothing clear of the AGDO and garage door at all times.

27. In order for the Safety Obstruction Force system to function it must first encounter an obstruction in the form

of an object / person on to which some force

MUST

be exerted. As a result the object / person / garage door

may suffer

DAMAGE AND / OR INJURY.

28.

The Safety Obstruction System is designed to work on STATIONARY objects only. Serious personal

injury,  death  and  /  or  property  and  /  or  product  damage  may  occur  if  the  garage  door  comes  into

contact with a moving object while it is opening or closing

Warranty Exclusions

No claims whatsoever will be recognized under the terms of the AGDO’s warranty which pertain to

damage,  injury,  cost  or  expense,  suffered  by  persons  and  /  or  to  property,  which  either  directly  or

indirectly arise out of any one of the following occurrences;

a. Failure  to  install  the  AGDO  in  accordance  with  the  captioned  instructions and  safety

recommendations.

b. The garage door coming into contact with a moving object. (refer Point 28 in the above)

c. The AGDO being used for other than a maximum 4 car residential application.

d. Failure to install the AGDO on a properly balanced well functioning garage door. (refer Point 3

in the above)

e. Failure  to  adequately  lubricate  the  garage  door  counter  balance springs.  (refer  point  6  in  the

above)

f. Attempting to open or close the garage door by directly pulling on the Engage and / or Disengage

Cord.

g. Manually releasing the garage door in any position other than when it is fully closed.

h. Failure to connect the AGDO to a properly earthed power supply.

i. Electronic or electrical component failure due to over voltage.

j. Note: Light bulbs and Hand Transmitter batteries are not covered under the terms of the AGDO

warranty.

Summary of Contents for SDO-10




















Reviews: