Centurion SDO-10, Installation Instructions And User Manual

Page: 18 / 19

- 18 -
SDOPD
TROUBLE SHOOTING GUIDE
Symptom Suggested Remedies
Reference
Page Item
• AGDO will not function at all
• Check that AGDO is connected to power supply ~ ~
• Check power point function by plugging-in an alternate appliance ~ ~
• Check that AGDO is engaged to door 11 13
• Disengage AGDO from door and check for obstructions 11 12
• Door stops before reaching • Disengage AGDO from door and check for correct spring balance 4 3
fully open position • Check for correct Safety Obstruction Force settings (open direction) 12 15
• Check for correct open direction travel adjustment 11 14
• Disengage AGDO from door and check for obstructions 11 12
• Door stops & reverses before • Disengage AGDO from door and check for correct spring balance 4 3
reaching fully closed position • Check for correct Safety Obstruction Force settings (close direction) 12 15
• Check for correct Safety Beam alignment 15 24
• Door stops before reaching
• Check for correct close direction travel adjustment 11 14
fully closed position
• Door will not Safety Reverse • Contact serviceman ~ ~
• Door requires excessive force
• Check for correct Safety Obstruction Force settings (close direction) 12 15
to Safety Reverse
• Door requires excessive force
• Check for correct Safety Obstruction Force settings (open direction) 12 15
to Safety Stop
• Check function of AGDO by operating from "Run" button 15 23
• AGDO will not function from • Check function of AGDO by learning-in a substitute Hand Transmitter 13 16
Hand Transmitter • Re learn Hand Transmitter code into AGDO 13 16
• Replace Hand Transmitter battery 13 16
• Hand Transmitter operating • Replace Hand Transmitter battery 13 16
range is poor • Extended AGDO antenna ~ ~
• Courtesy Lamp will not
• Replace Courtesy Lamp bulb 14 18
function
• Cannot adjust Safety
• Ensure that Safety Obstruction Force Adjustment Mode has been entered 12 15
Obstruction Force settings
• LED Indicator glows solid • AGDO has reached fully closed position 15 21
• LED Indicator slow flashes • AGDO has reached fully open position 15 21
• LED Indicator has extinguished • AGDO is traveling between limits 15 21
• Door will not Auto Close
• Check for Safety Beam damage ~ ~
• Check for correct Safety Beam alignment 15 24
• Check that Dip 1 & 2 have been selected to the "ON" position 14 17
• Check that connecting wires have not come loose from Safety Beams 15 24
• Check that connecting wires have not come loose AGDO terminals 15 24
• Will not Safety Reverse when
• Check that Dip 1 has been selected to the "ON" position 15 24
Safety Beams are interrupted
• Door is noisy
• Lubricate door springs with automotive wheel bearing grease
• Lubricate pivot point of door hinges with WD40
~ ~
• AGDO is noisy
• Check for loose Courtesy Lamp cover is not loose ~ ~
• Check that main cover is not loose ~ ~
• Check that chain is correctly tensioned 7 4