page 28
Command ‘DB’
This command deletes all Voice Phone numbers assigned to specific Call Buttons from the
system, i.e. it stops a number from being called when a button is pressed.
Description
Parameters
Removes the specified Voice
Phones assigned to Call Buttons
from the system
Phone number(s) (up to 16
digits each)
Call Button BU (1 or 2)
DB
(commands have been highlighted for clarity)
Delete and clear all Voice Phones assigned to
Button 1
Examples
Command
Description
P.xxxx.DB.BU1
P.xxxx.DB.BU2.1
Deletes only Voice Phone number 1 from
Button 2
Command ‘DP’
This command allows one or more Switch Phone numbers to be deleted from the system.
Description
Parameters
Removes the specified Switch
Phones from the system
Phone number(s) (up to 16
digits each)
DP
Deleting a Voice Phone
Deleting a Switch Phone
Airtime
Command ‘AT’
This command allows an airtime voucher to be loaded onto the controller, or remaining
airtime to be queried.
Since a voice transaction is initiated once a Call Button is pressed, there needs
to be sufficient airtime on the controller SIM card at any given stage.
(commands have been highlighted for clarity)
Delete phone number 0821234567
Examples
Command
Description
P.xxxx.DP.0821234567
P.xxxx.DP.0821234567.
0821234568.0821234569.
0821234566
Delete phone numbers 0821234567,
0821234568, 0821234569 and 0821234566
Summary of Contents for G-SPEAK
Page 1: ...G SPEAK Installation Manual GSM BASED INTERCOM SYSTEMS TM...
Page 39: ......