page 15
2. Remove the cover and unclip and remove
the circuit board from the retaining clips.
FIGURE 19.
FIGURE 18.
GSM Controller Mounting
The GSM Controller will typically be housed inside the enclosure of the device it is to
control, for instance a gate motor. However, it can be mounted onto a wall or other
structure by following the instructions below:
1. Insert screwdriver into slot on the
GSM Controller and twist.
Screwdriver
Circuit
board
Fastener
3. Mark position of the unit against the
mounting surface.
4. Using a 5mm masonry bit, drill a hole
into mounting surface.
5. Mount the unit using suitable fasteners.
FIGURE 20.
GSM
Controller
Slot
Cover
Mounting surface
Mounting
hole
Summary of Contents for G-SPEAK
Page 1: ...G SPEAK Installation Manual GSM BASED INTERCOM SYSTEMS TM...
Page 39: ......
