Menu, schedule
MENU
In this menu it is possible to set time schedule of all selected boiler heating and DHW circuits (if
any), adjust the temperatures of the selected heating circuits as well as any temperatures that can
be adjusted on the boiler controller and adjust the room corrector settings. It is possible to enabled
Glow on BioTec-L,
enabled
Glow
on BioTec Plus
,
change active
boiler side
and enabled
Taking
over.
1. SCHEDULE
In this menu it is possible to set the time schedule for each selected view (heating circuit), boiler
and, if any, heating of the DHW tank. The time schedule can be switched off or selected from one of
the tables with set time intervals of active and inactive function. Views and settings of existing time
schedules vary depending on the configuration.
1.X. Boiler
1.x.x. Schedule
Choose when the boiler is active or not active
on a particular day of the week - time schedules can be switched off or select one of 3 tables
where boiler activity times can be set. Only one table can be active at a time.
Schedule
OFF
Factory:
setting
OFF / Table 1/2/3
1.1. View A
1. 1. 1. Day/Night Temp.
Selecting the set room temperature mode -
Day temperature, Night temperature
or
Table
selection. If the temperature mode is selected
according to the
Table
, the times in the following
Tables
must be set (switching the temperature
mode according to the specified time in each day). Only one
Table
can be active at the same time.
Day/Night Temp.
Day Temp.
Factory:
setting
Day / Night / Table 1/2
1.1.x. Table 1/2
Time table for
day / night
room temperatures. Green at the left edge of the table indicates the start of
daytime temperature, red at the edge of the table indicates the start of nighttime temperature. It is
possible to choose 3 times daily and 3 times night temperatures on any day of the week. The factory
settings of the tables are: Every day from Monday to Sunday at 06:00 hours the daily temperature
of the room starts and lasts until 22:00 when the night temperature begins, which lasts until the next
day at 06:00. On the right side of the screen there are buttons to copy the desired day and paste it to
another selected day (copy / paste).
PelTec/-lambda, PelTec-HERMETIC, PST
BioTec-L, BioTec Plus
ENG
Technical instructions
C
SK-Touch
32
Summary of Contents for CSK-Touch
Page 87: ......
