Two Line Phone - Option 1
E1 E2 E3 E4
TalkSwitch Jacks
Incoming
Phone Lines
Extensions 111 and 112
Call Handling:
TalkSwitch extensions 111, and 112 are wired to a
two line phone. When a call is transferred to
extention 111, line 1 on the phone will show as
active; similarly calls on extension 112 will show
line 2 as active.
Through the software, you may configure each
incoming line to ring any given number of
extensions, including all the extensions. However,
be careful
if incoming line 1 is configured to ring
both extensions 111, and 112. An incoming call will
ring both phone lines at the same time. Instead
configure incoming line 1 to ring extension 111, and
line 2 to ring extension 112.
Wiring Diagram
Phone Wiring
TM
Connecting Phones
Quick Guide
copyright centrepoint technologies inc. 2002
www.talkswitch.com
Ext 112
to Jack E2
Ext 111
to Jack E1
“To Tel. Line L1 or L1/ L2”
“To Tel. Line L2”
Each phone line is connected to a single
line RJ-11 cable. The jacks at the end of
the cables should have two pins as shown
below.
Single Line RJ-11 Jack
Two line phones must have
these two phone jacks labeled
“L1/L2” and “L2”. The jack
labeled “L1/L2” will have 4 pin
connectors and the “L2” jack will
have 2 pin connectors.
Pin 1
Pin 2
