7
Safety instructions for batteries:
– Protect battery from water and moisture!
– Do not expose batteries to naked fl ames!
– Do not use faulty or deformed batteries!
– Do not open batteries!
– Do not touch or short circuit battery contacts!
– A slightly acidic, fl ammable fl uid may leak from defective Li-Ion
batteries!
– If battery fl uid leaks out and comes into contact with your skin,
rinse immediately with plenty of water. If battery fl uid leaks out
and comes into contact with your eyes, wash them with clean
water and seek medical attention immediately!
– At the end of their life, always recycle batteries.
– Never discard batteries with domestic waste. They must be sent
to appropriate collection centres for disposal.
– If the pump is defective, remove the battery from the pump.
– Remove the battery from the pump being transported.
– Transport of Li-Ion battery packs:
The shipping of Li-Ion battery pack is subject to laws related to the carriage of hazardous goods
(UN 3480 and UN 3481).
Familiarise yourself with current regulations concerning shipment of Li-Ion battery packs.
Only send the battery pack if the housing is intact and no fl uid is leaking.
Remove the battery pack from the pump being transported.
Prevent the contacts from short-circuiting (e.g. by protecting them with adhesive tape).
Compliance of use
– The device is a portable battery powered hydraulic pump, it can be connected to hydraulic
heads for compression, cutting and punching and other specifi c uses produced by
Cembre
Any other use, or use deemed to be outside of the specifi cation of the device shall be regarded
as improper use. In these instances the manufacturer/supplier shall not be liable for any damage
resulting from improper use and the user agrees to bear all risk.
– The device is manufactured in accordance with current technological standards and recognized
safety rules. However, danger to life and limb of the user or third parties/or damage to the
device and other tangible assets can arise during use.
– The device may only be used for its intended purpose and if in perfect working order, it must
be used with appropriate consideration given to the safety and danger warning messages
stated in the operating manual.
– Usage of the device for its intended purpose also incorporates compliance with the operating
manual, including the manufacturer‘s maintenance recommendations and specifi cations.
