7
B540ND
B540NDA
B540NDK
Application range
suitable for installing electrical compression
connectors for conductors up to 150 mm
2
(300 MCM)
and for cutting Copper, Aluminium, ACSR and Steel
conductors, ropes and rods
Type of acceptable jaws:
(Ref. to table page 17)
Crimping
Cutting
CDD6N - CDD6-6N - CDD6-8N
CMB4N - CMB5N - CMB6N
Crimping force
kN (US sh. ton)
54 (6.1)
Operating pressure
bar (psi)
600 (8702)
Dimensions
(Ref. to FIG. 8 page 18)
mm (inches)
403 x 104 x 87
(15.9 x 4.1 x 3.4)
413 x 108 x 87
(16.3 x 4.2 x 3.4)
Weight with battery only
(no jaws)
kg (lbs)
2,9 (6.4)
3,1 (6.8)
Motor V
DC
18
Operating temperature
°C (°F)
-15 to +50 (+5 to +122)
Recommended oil
TOTAL DIEKAN 1640 or equivalents
Safety
maximum pressure valve
Rechargeable battery
type
METABO
CB1820L
MAKITA
BL1850B
V / Ah (Wh)
18 / 2.0 (36)
18 / 5.0 (90)
Weight
kg (lbs)
0,4 (0.9)
0,6 (1.3)
Acoustic noise
(1)
dB L
pA
67,7 (A) L
pCPeak
89,2 (C) L
WA
74,2 (A)
Vibrations
(2)
m/s
2
a
hv
0,724
Battery charger
Input
type
V / Hz
METABO ASC30-36
37334000
METABO ASC30-36
37401000
MAKITA DC18RC
220 - 240 / 50 - 60
115 / 60
120 / 50 - 60
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L
pA
= weighted continuous acoustic pressure level equivalent.
L
pCPeak
= maximum value of the weighted acoustic displacement pressure at the work place.
L
WA
= acoustic power level emitted by the machine.
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard and under
operating conditions much more severe than those normally found.
1. GENERAL CHARACTERISTICS
