background image

5

Use and Care of rechargeable batteries

Recharge the supplied battery using the specific manufacturer’s charger only.
A charger intended for a specific type of battery may become a fire hazard if used with other types 
of battery.
Use the tool with the specific intended battery pack only. The use of any other type of battery may 
lead to a risk of injury or fire. 
When the battery is not in use, store it away from other metal objects, such as paperclips, coins, 
keys, nails, screws or other small metal objects that can create a connection between two terminals. 
Keep batteries out of reach of children.
Short-circuiting the battery terminals can cause burns or fire.
If in very poor condition, a battery can leak liquid. Avoid contact with the eyes. 
In the case of accidental contact, rinse immediately under running water. 
If the liquid comes into contact with the eyes, seek medical assistance immediately. Battery liquid 
can cause irritation or burns.

 

 

Keep batteries dry!

 

 

Keep batteries away from fire! 

 

 

Never throw batteries into fire or water.

  
 

Always recycle batteries after use.

 
 

Never dispose batteries with household waste. They must be deposited at the dedicated 

 

collection points for disposal.

Transporting Li-Ion batteries
Lithium ion rechargeable batteries are subject to the legal requirements on hazardous goods. 
In the event of road transport by the user, no further precautions are necessary.
In the event of third-party transport (e.g. transported by airplane or courier), transportation must 
comply with the special requirements concerning packaging and labelling. We recommend that 
you consult an expert.
Rechargeable batteries can only be transported if undamaged. 
The packaging must prevent the batteries from moving around and exposed contacts must be
covered with adhesive tape.

Before using the tool, care-
fully read the instructions 
contained in this manual.
SAVE THESE INSTRUC-
TIONS: this manual con-
tains important safety and 
operating instructions for 
the tool.

When operating 
the tool, keep han-
ds away from the 
danger zone.

WARNING SYMBOLS

User information 
(Directives 2011/65/
UE and 2012/19/
UE),see page 16.

Always wear safety 
gloves when ope-
rating the tool.

Summary of Contents for B540ND





















Reviews: