The part reference "B135-UC ; B135-UCA" includes the following:
– Basic tool complete with battery and shoulder strap
– Spare battery
– Battery charger
– Plastic carrying case "VAL P9-C"
2. APPLICATION RANGE
(Ref. to Figs. 2 and 4)
2.1)
The tool is supplied with the AU130-C adaptor, which will accept semicircular slotted
dies (common to
Cembre
130 kN tooling) suitable for:
– Indentation on copper conductors.
– Circular compression on copper conductors.
– Hexagonal compression on copper, aldrey or aluminium conductors.
2.2)
With the upper adaptor AU130-... and lower adaptor AC130-P, the tool can accept:
– Pre-rounding dies UP130-...
(used for converting aluminium sectoral conductor to a compact, round section).
– Containing dies (MV, MVC, MVM, MUA series) and the relevant indentors PS130-.../E
(to crimp connectors on aluminium cables using the deep indent crimping system).
3. INSTRUCTIONS FOR USE
(Ref. to Figs. 1 - 6)
3.1) Preparation
– The tool can be easily carried using either the handle or the shoulder strap (T) attached
to the rings (R and R1).
– With the tool in the rest position follow the procedure in § 3.6 (for copper cable) or § 3.7
(for aluminium cable):
3.2) Die advancement
Press the operating button (06) to acti-
vate the motor-pump and advance the
lower die. To halt the advancement,
release the operating button (06) and
the motor will cut out.
ENGLISH
43
4
200
201
205
206
02
03
04
08
12
30
33
34
35
38
40
42
43
44
45
51
52
54
56
55
61
63
65
74
75
77
78
79
89
90
39
48
48
49
49
36
37
41
46
62
82
84
83
85
86
87
87
88
45
44
45
43
N
EVER
PRESSURIZE
THE
TOOL
WITHOUT
INSERTING
THE
DIES
AS
THIS
COULD
CAUSE
DAMAGE
TO
THE
HEAD
AND
THE
RAM
.
06
201
FIG. 3