Operating the Fire
Manual Control
This appliance can be operated manually using the controls situated on the right-hand underside
of the upper canopy or by the included remote-control handset.
ON / OFF Power Switch
This switch is used to turn the mains supply to the appliance ON or OFF.
When the switch is in the ON position an indicator light located in the centre
of the screen will glow amber to indicate the appliance is switched on and in
standby mode. This needs to be in the ON position for both manual and
remote operation.
STANDBY
Used to switch appliance ON or OFF into standby mode.
FLAME
Pressing this button will cycle through the 4 different flame brightness levels.
HEATER
Use this button to select Low Heat, High Heat or heater OFF
When LOW heat is selected the indicator light will glow amber for 10 seconds.
When HIGH heat is selected the indicator light will glow red for 10 seconds.
Please note the heater will only operate when the room temperature is below
the temperature set on the handset, which can be adjusted using the
Temperature arrows on the Smart Control Panel. When the heater switches off
the fan will still continue to run for a short period to allow the appliance to cool
down.
BLUE
This button allows an additional blue flame effect to be switched on and off.
Page 7
Summary of Contents for CEVRSARE
Page 6: ...Page 6...
