ROCHESTER
Unpacking
Remove and discard the plastic bag.
Be responsible when handling the packing materials.
Keep the original packaging for future transportation and/or storage.
Check all accessories are removed from the packaging before storing it away for future use.
KEEP PLASTIC BAGS AWAY FROM CHILDREN!
Choosing a suitable location
The stove must have a minimum clearance of 50mm to combustible material on all sides. A
clearance of minimum 50mm to non-combustible materials is also required to ensure correct
operation. For combustible material clearances please consult with the manufacturer.
This appliance is for indoor installation only and is not designed to be installed outside. The
appliance must be kept away from any source of damp or moist conditions. Avoid any close
contact with water.
If there is any doubt regarding the suitability of the installation site please contact your
supplier The fire can be connected directly to a fused spur or plugged into a mains socket.
Ensure that the plug socket-outlet connection for this appliance is accessible. It MUST be readily
accessible for easy electrical isolation in the event of servicing and replacing components etc.
This appliance MUST NOT be located immediately below an electrical socket-outlet.
Installation
Installation must be carried out by a qualified and competent person.
Connect the appliance to single-phase AC supply of the voltage specified on the rating plate.
Should the fire be connected directly into the mains supply, then a fused switched spur with a 13
amp fuse must be fitted. It is imperative that the power supply is capable of handling a load of
Page 4
Summary of Contents for CEVRSARE
Page 6: ...Page 6...
