background image

IMPORTANT SAFETY ADVICE

 

 
 

WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS 

BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO 

PERSONS, INCLUDING THE FOLLOWING IMPORTANT SAFETY ADVICE.

 

 

 

 

DO NOT cover the heater, to avoid overheating of the product.

 

 

DO NOT leave the heater unattended while it is in use. Always turn the appliance to the OFF 
position and switch off at the mains socket when not in use.

 

 

DO NOT leave children unsupervised whilst the appliance is switched on.

 

 

DO NOT operate this appliance with a damaged cord or plug, or after the appliance 
malfunctions, has been dropped or damaged in any way. Contact the manufacturer.

 

 

DO NOT install a timer switch to operate the appliance.

 

 

DO NOT use this appliance as a freestanding appliance. It must always be securely fixed in 

accordance with the manufacturer’s instructions.

 

 

DO NOT insert or allow objects to enter any ventilation or exhaust openings on the appliance. 

To prevent a possible fire do not block air intakes or exhaust openings in any manner.

 

 

DO NOT place this appliance near flammable materials, surfaces or substances, as there may 

be a risk of fire. Keep flammable materials, surfaces or substances at least 1 metre away from 

the front of the product.

 

 

DO NOT switch on the fire if volatile vapours are present in the room.

 

 

DO  NOT use this appliance in any areas where petrol, paint or other flammable liquids are stored 
e.g. a garage or a workshop as the appliance contains components capable of producing a spark.

 

 

DO NOT touch any hot surfaces such as the heater vent when the heater is in use to avoid 

burns and personal injury.

 

 

DO NOT install the heater immediately below an electrical socket 

outlet DO NOT use outdoors.

 

 

CAUTION- Some parts of this product can become hot during use and cause burns. 

Particular attention has to be given where children and vulnerable people are present.

 

 

This appliance is for household use only

 

 
 
 
 
 
 

 

Page 2

 

Summary of Contents for CEVRSARE













Reviews: