Cellink BIO X, User Manual

Page: 36 / 60

32
04 Getting started
If you did not use the plunger:
1. Unscrew the top cap. There is no need to remove printhead from its mount.
2. Let the printhead and metal cartridge cool down before loading more granulates, or use a
funnel to prevent material from melting on the sides of the cartridge. Add thermoplastic
granulate to the cartridge to refill and then reassemble the printhead (Section 4.4).
3. Set the desired temperature of the printhead using the Utilities menu. Wait for the new
material to melt. Begin printing.