Cellink BIO X, User Manual

Page: 18 / 60

14
04 Getting started
4. Attach the Thermoplastic Printhead to
the BIO X printbox. Align the printhead
above the desired printhead mount and
push downwards using one hand (Figure
4A). Secure the bottom of the printhead
mount with your opposite hand to prevent
straining the motor (Figure 4B).
Figure 4: Attaching the Thermoplastic Printhead to the BIO X. (A) Line up the printhead with
a mount on the printbox. (B) Slide the printhead down with one hand and secure the bottom
of the printhead mount with the other hand. Once attached, the lights on the printhead will
turn from white to blue.
A
B