Cellink BIO X, User Manual

Page: 16 / 60

12
04 Getting started
NOTE: The printing parameters displayed on this manual might not be accurate for your specific protocol. For recommended
parameters please consult the documentation for the bioink being used.
4.1 Unpacking and installation
1. Open the package. Remove the pre-assembled Thermoplastic Printhead.
2. Check for all components of the Thermoplastic Printhead and accessories (Figure 2).
Figure 2: Thermoplastic Printhead com-
ponents. These include: (A) Thermoplastic
Printhead body, (B) the stainless-steel car-
tridge with nozzle, (C) the top cap, (D) the
insulated locking ring, (E) the stainless steel
plunger, (F) the plunger removal tool and (G)
the wrench for tightening the cartridge and
the nozzle.
A B
C
D
E
F G