Cellink BIO X, User Manual

Page: 26 / 60

22
04 Getting started
6. Attach the printhead to the printhead mount (Section 4.1). Navigate to the Tools menu to
lower the printhead mount. Select the tool to use and tap the downward arrow (Figure 9).
Once the mount is lowered, attach the air tube to the pneumatic connector on the printbox.
A
B C
Figure 9: (A) Attaching the Thermoplastic Printhead to the mount. (B) Attaching the airline to
the printbox. (C) Lowering the printhead to the active position.