CEFLA NewTom 5G, User Manual, Page: 40 / 110

4 Getting started
4.5 System start-up
To properly switching the device on:
1. Turn on the scanner unit by pushing the main switch located on the input panel (left side of the
device).
2. Turn on the workstation. Wait for the Operating System to be load.
3. Log in the Operating System with assigned User name and Password .
4. Start NNT software.
NOTE:
Always turn the scanner unit on first. If You try to use the NNT
software before the appliance has done its initialization
successfully, an error will occur (see Chap. 8 -
“Troubleshooting“)
4.6 System shut down
Next is the procedure for a proper turning off of the device:
1. Close the NNT software.
2. Shutdown the workstation console.
3. Turn off the scanner unit by pushing the main switch located on the input panel(left side of the
device).
WARNING:
Turn off the device when it has not been used for longer
than 3 hours.
WARNING:
Always turn the device off at the end of the working time.
4-12 NewTom 5G – User Manual