CEFLA NewTom 5G, User Manual, Page: 34 / 110

4 Getting started
4.3.2 Patient table console
UP/DOWN buttons
to be used after the patient is positioned inside the gantry,
to adjust the vertical position of the table (z axis).
LEFT/RIGHT-FORWARD/BACK buttons
to be used after the patient is positioned inside the gantry,
to adjust the position along the x and y axis of the table.
P1 button
to be used after the patient is sitting in the table to move
him/her inside the gantry.
P2 button
to be used after the device has been turned ON to move
the table to the default position.
Use the P2 button also at the end of the scan to move the
patient out of the gantry.
4-6 NewTom 5G – User Manual
Figure 4: Patient table console