ENGLISH
•
CEDIMA
®
• Technical Documentation • All rights reserved as per DIN 34 • Subject to modifications due to progressive development •
8-2
4.
In case of a justified complaint, we can choose to repair the device and/or to provide a
replacement against return of the device. Replaced parts or devices become our property.
5.
A complaint has to be filed in writing, stating machine number, invoice number and date.
6.
Improvements shall always be carried out at the delivery plant. Repair work requested by
the buyer to be carried out on his or a third party’s premises, needs prior consent by us. The
resulting costs of the mechanic and any other assistants are borne by the buyer. The warranty
expires, if the customer or any other, unauthorized person, interfere with the purchased device.
7.
If the replacement of assemblies or components by the buyer or others has been expressly
arranged with us, any possible recognition of the warranty case cannot be given by us until after
the defective parts have been returned to us and inspected by us.
8.
According to the statutory regulations the buyer is only entitled to cancel a contract, if we
refuse improvements or the supply of replacements acc. to fig. 4 even though a defect has been
proven, or a deadline that we have been given has elapsed unfulfilled. If only a minor defect has
occurred, the buyer is merely entitled to an abatement of the purchase price, which in any other
case is excluded.
We are not liable for compensation on account of a defect or damages subsequent to a defect,
unless these occur on account of an intention or a negligence which we are responsible for.
9.
No guarantee is assumed for damages that have arisen of the following reasons:
a) faulty installation,
b) improper use or overstressing,
c) permanent overload, leading to damages to coils or the windings of armatures,
d) extraneous causes, e. g. transport damages, climatic influences or other natural phenomena,
e) use of integral or accessory parts that are not suitable/adjusted to our devices.
10.
If there is reason for complaint about a diamond tool(s) must be removed from the machine
immediately! To protect your interests and to conduct a proper ins pection, a segment height
of at least 20 % (of height in new condition) is required. Failure to observe this will lead to any
claims to replacement that you may being voided!
11.
If warranty claims are satisfied by us, then this neither extends the warranty period nor does
it begin a new warranty period for the device. The warranty period for installed spare parts shall
end no sooner or later than the warranty period for the device.
12.
Otherwise, our complete terms of sale and delivery apply.
13.
The place of performance and venue for both parties is Celle, Germany.
CEDIMA
®
Diamantwerkzeug- und Maschinenbaugesellschaft mbH, Celle
Celle, Germany
Status: January 2005
Page 2 off 2 Pages
Appendix
