ENGLISH
•
CEDIMA
®
• Technical Documentation • All rights reserved as per DIN 34 • Subject to modifications due to progressive development •
8-1
8.0 Terms of warranty
1.
Complaints must be submitted without delay, however, within 14 days following the arrival of
the device at the latest. If this deadline has expired, or if the device complained about is put into
operation and used for work, then the device complained about shall be considered accepted
and therefore free of faults. Hidden defects must be reported in writing immediately after being
discovered, however at the latest within 6 months of the receipt of the device.
2.
We guarantee the agreed usability of the device delivered by us for a period of 12 months,
the term beginning on the day the device arrives with the buyer. Irrespective of this, our obliga-
tion shall be considered as fulfilled, as soon as the goods are despatched from our works/ware-
house. In no case do we assume a producers’ guarantee. The mandatory regulations of the law
for product liability remain untouched.
3.
Wearing parts are subject to a limited warranty. Wearing parts are parts subject to operation-
related wear during proper use of the device. The rate of wear cannot be uniformly defined and
differs according to the intensity of use. The wearing parts must be adjusted, maintained and,
if necessary, replaced for the specific device in accordance with the manufacturer’s operating
manual. Operation-related wear is not a reason for claims to defects.
Wearing parts for the construction devices such as core drilling and sawing machines and spe-
cial machinery as well as related general assemblies (if available):
– Feed and drive elements such as toothed
racks, gear wheels, pinions, spindles,
spindle nuts, spindle bearings, wires,
chains, sprockets, belts
– Seals, cables, hoses, packings, gaskets,
plugs, couplings and switches for pneumatic,
hydraulic, water, electricity, fuel systems
– Guide elements such as guide strips, guide
bushes, guide rails, rollers, bearings, sliding
protection supports
– Clamping elements for quick release
systems
– Flushing head seals
– Slide and roller bearings that do not run in
an oil bath
– Shaft oil seals and sealing elements
– Friction and safety clutches, braking devices
– Carbon brushes, collectors/armatures
– Consumable operating materials such as
fuels, lubricants, coolants etc.
– Easy-release rings
– Control potentiometers and manual switch-
ing elements
– Securing elements such as dowels,
anchors, screws and bolts
– Fuses and lamps
– Bowden cables
– Commutators
– Diaphragms
– Spark plugs, glow plugs
– Parts of the reversing starter such as the
starting rope, starting pawl, starting roller
and return spring
– Sealing brushes, rubber seals, splash
protection cloths
– Filters of all kinds
– Drive and guide wheels/pulleys and
associated rubber tyres
– Cable wire protection elements
– Drive and travel wheels
– Water pumps
– Cut-material transport rollers
– Drilling, separating and cutting tools
– Energy storage devices
Page 1 off 2 Pages
Appendix
