23
WIRELESS 7-IN-1 SENSOR MAINTENANCE
REPLACE THE WIND VANE
Unscrew and remove the wind
vane for replacement
REPLACE THE WIND CUP
1 . Remove rubber cap and Unscrew
2 . Remove the wind cup for
replacement
CLEANING THE RAIN
COLLECTOR
1 . Rotate the rain collector by turning
it 30°anti-clockwise .
2 . Gently remove the rain collector .
3 . Clean and remove any debris or
insects .
4 . Install the collector when it is clean
and fully dried .
CLEANING THE UV SENSOR
AND CALIBRATION
• For precision UV measurement,
gentle clean the UV sensor cover
lens with damp micro-fiber cloth.
• Over time, the UV sensor will
naturally degrade . The UV sensor
can be calibrated with a utility
grade UV meter, please refer to
Calibration section in previous page
for about the UV sensor calibration .
CLEANING HYGRO-THERMO
SENSOR
1 . Remove the 2 screws at the bottom
of the radiation shield .
2 . Gently pull out 4 pcs shield .
3 . Carefully remove any dirt or insects
on the sensor and ventilation fan
(do not let the sensors inside get
wet) .
4 . Clean the shield with water to
remove any dirt or insects .
5 . Install all the parts back when they
are clean and fully dried .
TROUBLESHOOT
Problems
Solution
7-in-1 wireless sensor
is intermittent or no
connection
1 . Make sure the sensor is within the transmission range
2 . If it still not work, reset the sensor and resynchronize with
console .
Indoor wireless sensor
is intermittent or no
connection
1 . Make sure the sensor is within the transmission range
2 . Make sure the channel displayed match to the channel
selection on sensor
3 . If it still not work, reset the sensor and resynchronize with
console .
No WI-FI connection
1 . Check for WI-FI symbol on the display, it should be alway on .
2 . Make sure you connect to 2 .4G band but not 5G band of your
WI-FI router .
Data not reporting to
Wunderground .com or
weathercloud .net
1 . Ensure your Station ID and Station Key are correct .
2 . Ensure the date and time is correct on the tablet . If incorrect,
you may be reporting old data, not real time data .
3 . Ensure your time zone is set properly . If incorrect, you may be
reporting old data, not real time data .
Wunderground Precip .
Accum. Total graph offset
1 hour reset time, during
summer daylight saving
time
1 . Ensure the time zone of the device on Wunderground set
correctly
2 . Ensure the time zone and DST on your console are correct .
3 . If you located your station out of US time zone region in
Wunderground, the DST will be invalid . To solve this issue,
please turn off the DST function in console.
Rainfall is not correct
1 . Please keep the rain collector clean
2 . Make sure the tipping bucket inside can work smoothly
