15
3 . Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4 . Press
[ ]
or
[ ]
key to adjust the value of the flashing digit.
5 . Press
[ ALARM ]
key to save and exit the setting .
NOTE:
-In alarm mode, the “ ” icon will display on the LCD .
-The alarm function will turn on automatically once you set the alarm time .
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1 . In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds .
2 . When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function .
Or
press
[ ALARM ]
key twice to activate the alarm with ice pre-alarm function .
Alarm off
Alarm on
Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30 minutes earlier
if the temperature is below -3°C .
When clock reach the alarm time, alarm sound will start .
Where it can be stopped by following operation:
-Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next
day .
-By pressing
[ALARM / SNOOZE]
key to enter snooze that the alarm will sound again after 5 minutes .
-By pressing and hold
[ALARM / SNOOZE]
key for 2 seconds to stop the alarm and will activate again in
the next day
-By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the next day .
NOTE:
-The snooze could be used continuously in 24 hours .
-During the snooze, the alarm icon “
” will keep flashing.
MOON PHASE
The moon phase is determined by the time, date
and time zone . The following table explains the
moon phase icons of the Northern and Southern
Hemispheres . Please refer to
POINTING THE
WIRELESS 7-IN-1 SENSOR TO SOUTH
section about how to setup for the Southern
Hemispheres .
Northern
Hemisphere
Moon Phase
Southern
Hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning
Crescent
