Technical information
sheet
MeteoR2
v3.2EN
4.4.9. Level regulation
The floater (or channel for overflow pools) is connected to the unpluggable terminal block located
directly on the module. Pass its wire through a supplied cable gland.
The top-up solenoid is connected to the lugs at the bottom right of the module. The kit includes
two wires with female lugs, as well as cable glands and a round fuse to be installed next to it. (see
photo below).
Use a flat tipped screwdriver of a size adapted to the terminal block! (max.
2.5mm)
4.4.10. Forced operation (MF) / Pump stop (IP) extension control box
The MF / IP (PF10HY511) extension control box is connected to the unpluggable terminal block
located directly on the module. Pass its wire through a supplied cable gland.
Use a flat tipped screwdriver of a size adapted to the terminal block! (max.
2.5mm)
www.c-
cei.fr
20
