Cayman Systems 2E-W, User Manual

Page: 92 / 170

Using the Command Line Interface Cayman 2E-W User’s Guide
4-34
November 2000
set PPP module mru integer
Specifies the Maximum Receive Unit setting for the PPP interface.
The
integer
argument can be any number between 128 and 2048.
By default, the MRU value for PPP over Ethernet is 1492.
set PPP module magic-number { on | off }
Enables or disables LCP magic number negotiation. By default, magic
number negotiation is turned on.
set PPP module protocol-compression { on | off }
Specifies whether you want the Cayman 2E-W to compress the PPP
Protocol field when it transmits datagrams over the PPP link. By
default, protocol field compression is turned off.
set PPP module lcp-echo-requests { on | off }
Specifies whether you want your Cayman 2E-W to send LCP echo
requests. By default, LCP echoing is turned on. You should turn off
LCP echoing if you do not want the Cayman 2E-W to drop a PPP link
to a nonresponsive peer.
set PPP module failures-max integer
Specifies the maximum number of Configure-NAK messages the PPP
module can send without having sent a Configure-ACK message. The
integer
argument can be any number between 1 and 20. The default
value for the maximum failure count is 10.
set PPP module configure-max integer
Specifies the maximum number of unacknowledged configuration
requests that your Cayman 2E-W will send. The integer argument can
be any number between 1 and 10. The default value for the
integer
argument is 10.
set PPP module terminate-max integer
Specifies the maximum number of unacknowledged termination
requests that your Cayman 2E-W will send before terminating the