Cayman Systems 2E-W, User Manual

Page: 72 / 170

Using the Command Line Interface Cayman 2E-W User’s Guide
4-14
November 2000
who
Displays the names of the current shell users.
wireless learn
Lets you put your Cayman 2E-W into Learn mode for 60 seconds,
allowing it to acquire its network address from a HomeRF device in
Teach mode on your network. Only supported for HomeRF.
wireless teach
Lets you put your Cayman 2E-W into Teach mode for 60 seconds,
allowing it to advertise its network address to other HomeRF devices
in Learn mode on your network. Only supported for HomeRF.
About CONFIG
Commands
You reach the configuration mode of the command line interface by
typing
configure
(or any truncation of
configure
, such as
c
or
config
) at the CLI ROOT prompt.
CONFIG Mode
Prompt
When you are in CONFIG mode, the CLI prompt consists of the
name of the Cayman 2E-W followed by your current node in the
hierarchy and two right angle brackets (>>). For example, when you
enter CONFIG mode (by typing
config
at the ROOT prompt), the
Dogzilla (top)>>
prompt reminds you that you are at the top of the
CONFIG hierarchy. If you move to the
ip
node in the CONFIG
hierarchy (by typing
ip
at the CONFIG prompt), the prompt changes
to
Dogzilla (ip)>>
to identify your current location.
Some CLI commands are not available until certain conditions are
met. For example, you must enable IP for an interface before you can
enter IP settings for that interface.